Share the Care this Holiday Season 25% Off All Products and More!   Shop Now

Knowledgebase


Knowledgebase Search:



Knowledgebase Article

emWave2 FAQ's

May 22, 2017

What are the minimum system requirements to run the emWave2 software program?
System Requirements for Mac:

  • Mac OS® X 10.7 Lion or newer operating system.
  • Recommend Core™2 Duo at 1.8GHz or faster processor
  • One available USB Port - HeartMath’s USB module sensor is required for Assessments
  • Internet connectivity required for HeartCloud access
  System Requirements for Windows:
  • Microsoft Windows® 7, Windows 8.1, or Windows 10.
  • 1.8 GHz or faster processor recommend Intel® Core™2 Duo at 2.0GHz or faster
  • 2 GB RAM - recommended 4GB or more
  • One available USB Port - HeartMath’s USB module sensor is required for Assessments
  • Internet connectivity required for HeartCloud access

How is the emWave2 different from a heart rate monitor?
The emWave is very different from handheld devices that simply measure heart rate. The emWave2 analyzes your heart rhythms for “coherence”, a term used by scientists to describe a highly efficient physiological state in which the nervous system, cardiovascular, hormonal and immune systems are working efficiently and harmoniously.
A heart rate monitor only provides you with information about your average heart rate.

How does using this stress management device differ from deep breathing?
While rhythmic breathing exercises can help control your heart rate and have a calming effect on the body, shifting attitudes and emotions take more than that. Research shows that the key to learning how to neutralize and counter the effects of stress is by actively adding a positive feeling such as appreciation, care and compassion to the process. Experiencing positive emotions has a much broader range of health and wellness benefits than simply forcing the system into coherence through rhythmic breathing. Generating feelings of appreciation, care or compassion adds a dynamic element for stress management. Using the breathing pacer found in the emWave in conjunction with generating positive emotions helps synchronize your nervous system and creates positive changes in your heart rhythm patterns to create and sustain the coherence needed for stress relief.

What are some of the benefits I could expect from using the emWave and how much time does it take to see results?
Frequent users of the emWave2 report:

  • stress reduction
  • increased energy and resilience
  • greater mental clarity for decision-making and creativity
  • enhanced emotional balance and improved listening ability
  • better, more restful sleep

 

Most people get into medium or high coherence within a few short sessions and feel a reduction in stress. Using the Quick Coherence® technique, which you can read about in the HeartMath Library or learn from the Coherence Coach included in the Games section of the emWave program, is highly recommended as it accelerates the process of learning tools for stress management. Practicing stress management techniques is the key, but results generally come quickly. Additionally, emWave includes four challenge levels so that as you practice you can continue to refine your ability to eliminate and counter the negative effects of stress.

How is the emWave different from other stress management devices?
There are certainly other stress management devices designed to help people with stress and HeartMath's position is that we are very much in favor of any stress management devices or stress management techniques that can help with the mounting global stress problem.

What distinguishes the emWave from many other stress management products is the significant body of published scientific research that has been incorporated into its development. Our 20 years of experience, validation and practical applications demonstrate the effectiveness in all of the stress management products that HeartMath offers. Additionally, emWave is just one of many products found in the HeartMath system. The system — consists of tools, stress management techniques and proven computer based technology. All HeartMath products and services compliment each other and have been used for stress management and increasing performance by hundreds of thousands of people in over 85 countries, and applied in Fortune 100 corporations, health care systems, government agencies and school systems. emWave is an extension of this system and carries with it the breadth of credibility and proven results associated with HeartMath.

Has HeartMath done studies to support the benefits of the emWave?
HeartMath has done numerous studies on the effect of positive emotions on stress, physiology and human performance. These studies have been published in prestigious journals including Stress Medicine, American Journal of Cardiology, Preventive Cardiology, Journal of the American College of Cardiology, Integrative Physiological and Behavioral Science and Harvard Business Review.

What is the emWave actually measuring?
Both the emWave2 and the emWave Pro measure your Heart Rate Variability: the time-intervals between the heartbeats. Whenever we are stressed, these time-intervals become jagged and irregular, sending a chaotic pattern throughout our body and we feel this: our body becomes tense. HeartMath has done a lot of research on the effect of emotions on our body and when we experience positive emotions such as care, gratitude, appreciation and compassion, those time-intervals in our Heart Rate Variability Pattern become very smooth and sine-wave like. This creates a much more orderly and balanced pattern in our internal systems, creating a state of coherence. We experience this as a more calm, harmonious state.

What does it mean when the blinking light at the bottom goes from blue to red?
At that moment the unit is showing you it is not receiving enough pulse signal to measure and display your coherence level. A simple remedy is to take your finger off the sensor, rub your finger tip to increase the circulation underneath your skin, and then lightly cover your finger sensor again. Or, if you are using the ear sensor, please take your sensor off the earlobe, rub your earlobe to increase the circulation there and then replace the sensor on the fleshy part of the earlobe. You should see the light at the bottom blink both blue and red while it is re-calibrating to you, and after a few seconds it should continue to blink blue. This lets you know it now has a good pulse signal and is receiving enough information.

My unit suddenly turns off while I'm using it. What is going on?
When your unit suddenly turns off, it can mean two things. First, it may mean your unit has not been receiving enough pulse signal to continue a reading. If this is the case, the light at the bottom will have turned red (see the answer above). If it doesn't receive enough information for 10 seconds the unit will shut off to retain its battery. In this case, simply rub your earlobe or finger tip and restart your session.

Second, it may mean your unit is in a different mode all together. Often people access the 'Advanced Mode' inadvertently, accessing a specific setting called the 'Stealth Mode'. The Stealth Mode can be very useful when you are in situations where you don't want to attract attention, since you won't see any of the blinking and moving light feedback on your unit. But getting into this mode by accident can be confusing and disconcerting, however, it is easily remedied. To find out if you are in the Stealth Mode, turn on your unit and listen to the number of beeps it makes. If you hear two beeps, the first answer given above will apply, however, if you hear three beeps, your unit is in the 'Advanced Mode'. To get your unit out of this mode, back into the 'Basic Mode', simply press and hold the top of the sensor button (closest to the word 'emWave') for at least 10 seconds. You will hear four tones. After you hear these four beeps, your unit has been reset into the 'Basic Mode'. It will now work normally again.

Can I save my session or transfer data from my emWave2 to my computer software program?
Yes, you can! Open the emWave program on your computer. Plug your unit into the USB port on your computer.
Click - File and Sync emWave. Click - OK or Continue to begin the transfer.

My lights are suddenly acting strange. What does this mean?
First of all, if you are seeing lights, it means your unit is not broken! It simply means you have accessed the 'Advanced Mode' of the emWave2. The 'Advanced Mode' doesn't mean 'more difficult', it simply means it is displaying your information in a slightly different way to give you more information and make your practice more interesting. To know for sure if you are in the 'Advanced Mode', turn your unit on and listen to the number of beeps. If you hear three beeps, it means you have landed in this 'Advanced Mode'. To get your unit out of this mode, back into the 'Basic Mode', simply press and hold the top of the sensor button (closest to the word 'emWave') for at least 10 seconds. You will hear four tones. After you hear these four beeps, your unit has been reset into the 'Basic Mode'. It will now work normally again.

Can I use the emWave along with other stress management practices?
Yes, emWave works well as an adjunct to other stress management practices. It can easily provide verification of the effectiveness of many other approaches to counter the effects of stress and can be used as a friendly facilitator of other stress management methods.

Do I need to be experienced with technology in order to use the emWave device?
No. emWave2 is very simple and easy to use. The Quick Start Guide provides clear instructions on how to easily operate and immediately benefit from your emWave.

Is there training available to help me learn about my HeartMath product?
Yes. There are free emWave2, emWave Pro® or Inner Balance training videos at — e-Training, a free emWave® Orientation Class as well as personal HeartMath instruction.

Aside from helping to reduce stress, are there other applications for using the emWave that I can benefit from?
The applications of the emWave2 include more than stress management. Increasing your coherence level — which is the primary goal of using the emWave — increases performance. Whether or not you feel the negative effects of stress, you can use it to improve mental clarity which will have a positive effect on business, communications and creativity. Additionally, emWave provides a great way to improve performance in sports. It trains you to more easily enter into a high performance state that athletes call “The Zone”.

Our 60-Day No-Risk Guarantee
If you are not completely satisfied with your purchase, you may return it within 60 days for a full refund, less the shipping and handling fees. The product must contain all of its parts and be in a satisfactory condition suitable for resale.






Sign up for HeartMath's free newsletter

Back to Top